Register
Why register?



       Home  |  Exterior  |  Interior  |  Performance  | Electronics  |  Diesel  |  Wheels  |  Search  |  Contact Us        
Cart: 0  

4-Ch K-Type Amp

AEM 4-Channel K-Type Thermocouple Amplifier



AEM 4-Channel K-Type Thermocouple Amplifier



4-Channel K-Type Thermocouple Amplifier

AEM’s 4-Channel K-Type Thermocouple Amplifier provides laboratory-grade accuracy for virtually any on-board temperature measurements. This unit utilizes low-cost K-Type thermocouple amplifiers to measure multiple engine system temperatures with better accuracy and faster response times than currently available temperature-measuring devices.

Unlike common single-channel gauges and amplifiers whose readings can vary up to 20? C from actual temperatures, AEM guarantees its 4-Channel K-Type Thermocouple Amplifier to read better than 1% full scale, even at the extremes of the temperature range! The unit achieves its laboratory-grade accuracy via a 100% surface-mounted PCB (printed circuit board) that has four differential temperature inputs fed into an A/D converter and fitted using a stage-three, eighth-order polynomial curve fit. The amplifier then compensates for this value using AEM’s on-board cold junction temperature measurement, and then sends the temperature outputs on feedback-monitored 0-5v analog outputs and an RS-232 serial data stream.

The 4-Channel K-Type Thermocouple Amplifier is ideal for users who want to accurately monitor multiple engine system temperatures, including water, air, coolant, fuel, disc brake and more. Multiple channels allow you to use each amp to simultaneously read different system temperatures (one channel for EGT, one channel for CLT, etc.). Users can utilize ANY K-Type thermocouple including commonly-available miniature thermocouple connectors, and datalog the readings via an RS-232 serial data stream. K-Type sensors sold separately.

  • Uses common miniature thermocouple connectors or ANY K-Type thermocouple
  • On-board cold junction temperature compensation for laboratory-grade accuracy
  • Includes FOUR (4) 0-5v analog outputs
  • 0-1,000? C(32-1,832? F) measurement range
  • Measures up to 20? C below cold junction temperature
  • RS-232 serial port included for datalogging (programmable EMS not required)
  • “Fault LEDs” indicate when a thermocouple is faulty
  • High-quality Deutsch con
Estimate Shipping Time (days): Usually ships within 4-7 days
Price: $331.50

Add To Wish List
 

  Bookmarks  
BlogmarksBlogmarks DeliciousDelicious DiggDigg GoogleGoogle NetvouzNetvouz RedditReddit SimpySimpy TechnoratiTechnorati NetscapeNetscape Yahoo Web2Yahoo Web2 FacebookFacebook
      


  Category  
Electronics
Greddy
E-Manage Blue
E-Manage Accessories
E01 Programmer
PROFEC E-01
PROFEC E-01 Replace Parts
PROFEC E-01 Accessories
E-Manage Adaptors
E-Manage Ultimate
E-Manage Ultimate Acces
PROFEC B-SPEC2
PROFEC Type-S
Remote Switching System
Multi Switching System
Boost Cut Controller
Speed Cut Controller
AC-Autotechnic
VTEC Controller
AEM
4-Ch K-Type Amp
AFC NEO P&P Harnesses
e-Manage P&P Harness
Factory Harness Extensions
OBD0 to OBD1 Harnesses
OBD1 to OBD2 Harness
OBD2 to OBD Harness
OBD2A to OBD2B Harness
Peak & Hold Injector Module
P&P Engine Management
SAFC Plug & Play Harnesses
SAFC2 Plug & Play Harnesses
Sensors and Connectors
Twin-Fire Ignition Modules
Universal Engine Management
Universal Engine Management
VAFC Plug & Play Harnesses
VAFC2 Plug & Play Harness
Wideband UEGO Modules
      
     Give us your feedback Site Map  |  Customer Service  |  Specials  |  Order Tracking  |  Jobs Contact     
Copyright © 2002-2005 Autoaccessorystore. All rights reserved. Terms and conditions.
Security and privacy policy | ContactUs | Stores

Automotive Articles | Dash Trim Kits | Recaro Racing Seats | Sitemap 2